Configure a pool of numbers for Dynamic Number Insertion

Dynamic number pools give you a greater level accuracy if you have a high volume website or are tracking multiple channels or campaigns.

You can it up by following these steps:

1. Click Dynamic Insertion in the main menu
   
   
    
2. Select the name of your website
3. Click + Add Swap Rule
4. Select the medium you would like to track from the list (if you need to use a custom medium, type it in the box and then select it from the list)
5. Enter the number on the website to be replaced
6. Select the first tracking number to be shown
7. Click Save
8. Once saved, click on the Pools tab to add numbers to the pool
9. You will see the list of your configured rules which are eligible for number pools
   
   
    
10. Under Additional Numbers next to the tracking number you would like to make a pool, click the drop down:
    
    
     
11. Select the numbers you'd like to add to the pool:
    
    
     
12. Click Save

Next steps

Congratulations, your dynamic number pool is now configured! 🙌

You might also like to:

• If your tracking code is not yet installed, install the tracking code
• Check if the tracking code is installed 
• Check if your numbers are swapping out correctly